Comic supplies

Add to cart $0.75

For comics published from the 1940s to the 1950s, the ARKLITE sleeve size is 8 x 10-1/2" with a 1-1/2 flap that can be easily folded or taped shut (mesurements may vary plus or minus 1/8." When selecting the size needed, measure your comic carefully and allow up to 1/4 on each side to insure proper fit. ARKLITES are made from 1 mil thick Mylar-D. Lightweight and easily affordable, these sleeves offer hundreds of times the archival storage protection of non-archival ploypropylene and polyethylene bags.

Add to cart $12.00

For comics published from the 1940s to the 1950s, the ARKLITE sleeve size is 8 x 10-1/2" with a 1-1/2 flap that can be easily folded or taped shut (mesurements may vary plus or minus 1/8." When selecting the size needed, measure your comic carefully and allow up to 1/4 on each side to insure proper fit. ARKLITES are made from 1 mil thick Mylar-D. Lightweight and easily affordable, these sleeves offer hundreds of times the archival storage protection of non-archival ploypropylene and polyethylene bags.

Add to cart $17.50

For comics published from the 1940s to the 1950s, the ARKLITE sleeve size is 8 x 10-1/2" with a 1-1/2 flap that can be easily folded or taped shut (mesurements may vary plus or minus 1/8." When selecting the size needed, measure your comic carefully and allow up to 1/4 on each side to insure proper fit. ARKLITES are made from 1 mil thick Mylar-D. Lightweight and easily affordable, these sleeves offer hundreds of times the archival storage protection of non-archival ploypropylene and polyethylene bags.

Add to cart $11.00

For comics published from the 1940s to the 1950s, the R-KIVAL COMIC GUARD sleeve size is 8-1/4 x 10-1/2" (measurements may vary plus or minus 1/8.") When selecting the size needed, measure your comic carefully and allow up to 1/4 on each side to insure proper fit. COMIC-GUARDS are made from 4 mil thick Mylar-D with a rounded corner cut tab allowing for easy insertion and removal of your comic. These heavy duty sleeves offer hundreds of times the archival storage protection of non-archival ploypropylene and polyethylene bags.

Add to cart $1.25

For comics published from the 1940s to the 1950s, the R-KIVAL COMIC GUARD sleeve size is 8-1/4 x 10-1/2" (measurements may vary plus or minus 1/8.") When selecting the size needed, measure your comic carefully and allow up to 1/4 on each side to insure proper fit. COMIC-GUARDS are made from 4 mil thick Mylar-D with a rounded corner cut tab allowing for easy insertion and removal of your comic. These heavy duty sleeves offer hundreds of times the archival storage protection of non-archival ploypropylene and polyethylene bags.

Add to cart $46.00

For comics published from the 1940s to the 1950s, the R-KIVAL COMIC GUARD sleeve size is 8-1/4 x 10-1/2" (measurements may vary plus or minus 1/8.") When selecting the size needed, measure your comic carefully and allow up to 1/4 on each side to insure proper fit. COMIC-GUARDS are made from 4 mil thick Mylar-D with a rounded corner cut tab allowing for easy insertion and removal of your comic. These heavy duty sleeves offer hundreds of times the archival storage protection of non-archival ploypropylene and polyethylene bags.

Add to cart $19.95

25 One Size Fits All Ultra-Pro Comic Dividers. One size fits all comic storage boxes, 40 points, white rigid polypropylene material, pressure sensitive labels, and also acid free.

Add to cart $4.29

Package of 10 corrigated cardboard title dividers, 5 with left title tabs, 5 with right title tabs. Title side is oyster white, back siode standard coardboard brown. An inexpensive and easy-to-use solution for orgaizing a comics collection. All-white plastic comic title dividers also available.

Add to cart $5.95

100 large size paperback bags for storage & dust protection. 1-mil 6"x7-3/4" with 2" flap. Holds paperbacks with dimentions 5 x 7" and 1-1/2" thick.

Fanboy's Comic/Manga Trace & Draw Pad includes 15 sheets of Canson translucent tracing paper and 20 sheets of heavyweight drawing paper in one convenient pad.

Fanboy's Comic/Manga Trace & Draw Paper includes 20 sheets of tracing paper, 20 sheets of heavyweight drawing paper and #2 pencil.

Fanboy's Create your Own Comic Book incledes everything needed to create aa full comic book, including 20 Comic Book Art Boards, 2 Comic Book Cover Sheets, 2 Concept Sketch Pages, 4 Comic Book Layout Pages and complete instructions.

Fanboy's Learn to Draw Comics includes 12 sheets of heavyweight drawing paper, 3 stencils for creating borders and word balloons, #2 pencil, and instructions. Dimensions: Standard 6.625"x10.25" comic size.

Fanboy's Make Your Own Comic Book includes 12 sheets of Canson tracing paper, 3 stencils for creating borders and word balloons, #2 pencil, and complete instuctions. Dimensions: Standard 6.625"x10.25" comic book size, acid free.

Fanboy's Make Your Own Manga Book includes border and word balloon stencils to help create your very own exciting manga book.

Fanboy's Make Your Own Pocket Novel pre-assembled 28 page book includes instructions and materials for creating your very own graphic novels.

Add to cart $9.95

Fanboy's Manga Art Boards are made with Canson's specially formulated, acid-free, heavyweight ilusion paper. Also includes live and trim areas are indicated with non-reprucible blue guidelines in english and metric measurments. NOTE: For pencil, ink, and marker. Instructions included.

Fanboy's Manga Drawing Pad & Stencil includes 15 sheets of heavyweight drawing paper, stencils for creating borders and word balloons, and complete instructions for beginners. Acid Free

Add to cart $8.95

Manga Art Boardz are acid-free bright white with non-repro blue lines and have been created specifically for Manga art. They are Pencil & Ink friendly with a live area 150 x 220 mm. Available in packs of 25 boards.

Add to cart $24.95

Package of 25 4-mil comic book sleeves (7-1/4-in. x 10-1/2-in. with 1-1/2-in. top flap), made from archival polyester (Mylar brand), an inert material with crystal clear transparency (used by the Library of Congress to protect rare doccuments). Mylar sleeves will not discolor, damage, or adhere to items they protect. These sleeves provide beautiful and timeless protect along with extra support for fragile comics or other doccuments. Because these sleeves are semi-rigid, a backing board in not required in most cases. However, should a backing board be used, we recommend it be acid free.

Add to cart $24.95

Package of 50 2-mil comic book sleeves (7-in. x 10-1/2-in. with 1-1/2-in. top flap), made from archival polyester (Mylar brand), an inert material with crystal clear transparency (used by the Library of Congress to protect rare doccuments). Mylar sleeves will not discolor, damage, or adhere to items they protect. These sleeves provide beautiful and timeless protect along with extra support for fragile comics or other doccuments. Because these sleeves are semi-rigid, a backing board in not required in most cases. However, should a backing board be used, we recommend it be acid free.

Add to cart $25.95

Package of 25 4-mil comic book sleeves (8-1/4-in. x 10-1/2-in. with 1-1/2-in. top flap), made from archival polyester (Mylar brand), an inert material with crystal clear transparency (used by the Library of Congress to protect rare doccuments). Mylar sleeves will not discolor, damage, or adhere to items they protect. These sleeves provide beautiful and timeless protect along with extra support for fragile comics or other doccuments. Because these sleeves are semi-rigid, a backing board in not required in most cases. However, should a backing board be used, we recommend it be acid free.

Add to cart $28.95

Package of 50 2-mil comic book sleeves (8-in. x 10-1/2-in. with 1-1/2-in. top flap), made from archival polyester (Mylar brand), an inert material with crystal clear transparency (used by the Library of Congress to protect rare doccuments). Mylar sleeves will not discolor, damage, or adhere to items they protect. These sleeves provide beautiful and timeless protect along with extra support for fragile comics or other doccuments. Because these sleeves are semi-rigid, a backing board in not required in most cases. However, should a backing board be used, we recommend it be acid free.

Add to cart $34.95

Package of 25 4-mil comic book sleeves (9-in. x 11-1/2-in. with 1-1/2-in. top flap), made from archival polyester (Mylar brand), an inert material with crystal clear transparency (used by the Library of Congress to protect rare doccuments). Mylar sleeves will not discolor, damage, or adhere to items they protect. These sleeves provide beautiful and timeless protect along with extra support for fragile comics or other doccuments. Because these sleeves are semi-rigid, a backing board in not required in most cases. However, should a backing board be used, we recommend it be acid free.

Add to cart $34.95

Package of 50 2-mil comic book sleeves (8-7/8-in. x 11-1/2-in. with 1-1/2-in. top flap), made from archival polyester (Mylar brand), an inert material with crystal clear transparency (used by the Library of Congress to protect rare doccuments). Mylar sleeves will not discolor, damage, or adhere to items they protect. These sleeves provide beautiful and timeless protect along with extra support for fragile comics or other doccuments. Because these sleeves are semi-rigid, a backing board in not required in most cases. However, should a backing board be used, we recommend it be acid free.

Add to cart $25.95

Package of 25 4-mil comic book sleeves (7-1/2-in. x 10-1/2-in. with 1-1/2-in. top flap), made from archival polyester (Mylar brand), an inert material with crystal clear transparency (used by the Library of Congress to protect rare doccuments). Mylar sleeves will not discolor, damage, or adhere to items they protect. These sleeves provide beautiful and timeless protect along with extra support for fragile comics or other doccuments. Because these sleeves are semi-rigid, a backing board in not required in most cases. However, should a backing board be used, we recommend it be acid free.

Add to cart $25.95

Package of 50 2-mil comic book sleeves (7-1/4-in. x 10-1/2-in. with 1-1/2-in. top flap), made from archival polyester (Mylar brand), an inert material with crystal clear transparency (used by the Library of Congress to protect rare doccuments). Mylar sleeves will not discolor, damage, or adhere to items they protect. These sleeves provide beautiful and timeless protect along with extra support for fragile comics or other doccuments. Because these sleeves are semi-rigid, a backing board in not required in most cases. However, should a backing board be used, we recommend it be acid free.

Add to cart $0.89

The Ultra Pro Comic Preservers fit current size comics up to 7×10"-1/4." They are heavy gauge polypropylene comic sleeves (with flap and reseal tape) with a 24-point backing board permanently sealed inside for long term protection. Ultra Pro Comic Preservers are perfect for keeping your comics archival safe.